- On Sale
End Suction Pumps for Large Duty
End Suction Pumps to ISO2858 for multiple applications. Speed range is up to 3000 rpm with flow capacity up to 3000 m3/h
End Suction Pumps for Small Duty Applications
End Suction Pumps to ISO2858 and ISO5199 for multiple applications. with flow capacity up to 1000 m3/hr GENERAL FEATU
NFPA 20 Fire Pumps
FM Approved Fire pump packages Fire pumps manufactured are in full compliance with the requirements of NFPA
Sewage Pumps
Sewage Pumps has up to 3000m3/hr capacity, Speed up to 1500 rpm SW range of pumps has been designed to handle unscree
Split Casing Pumps
Split casing Pumps for over 60 models meet the standard requirements of all segments. Discharge range extends to 800 l/s
2.5 inch Aviation Tank Units FCMY 107M5L FCMY 107M5H FCMY 122M2
The FCMY107M5 & 108M5 Series Aviation Tank Units are designed for use in aviation refuelling systems with a maximum
BVMY1000 Under-Hydrant Ball Valve
Control valve BVMY1000 type 6” 300 lbs. x 4” 150 lbs. under-hydrant ball valve Provides positive and safe
- On Sale
1010 ALUMINIUM BALL FLOAT VENT VALVE
BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor
Air Operated Grease Pump
The air operated pumps with a 45: 1 pressure ratio has a 10, 30, 50 Kg grease capacity with the following features
CCM 8253, CCMY 8254 (2.5- 3 Inch) Stainless Steel Self-Seal Couplings
The Meggitt CCMY 8150-series stainless steel, self-sealing couplings are designed primarily for use in thepetroleum, che
CCMY 324, CCMY 4SP1 Dust Cap of Hose and Tank Units
1 1/2 and 2-inch stainless steel self sealing coupling
CCMY 4500, CCMY 4501 Tank unit, flanged and North Sea versions
Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin
CCMY 6150N, CCMY 6151N Tank unit, flanged or threaded versions
1 1/2-inch self sealing industrial couplings Material Gunmetal Weight 2.3 kg (5 lb) Max. Working Pre
CCMY 6153N, NH Self-Sealing Industrial Coupling Hose Unit
Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin
CCMY 6251N Tank Unit Threaded Version
2 1/2-inch self sealing industrial couplings TANK UNIT THREADED VERSION Materials Gunmetal, St/Steel, S
CCMY 6253N Self-Sealing Industrial Coupling Hose Unit
• Low cost • Fail safe tank units • Unrivalled quality for trouble free operation and long life
CCMY 6350N Tank Unit Flanged Version
Materials Gunmetal, St/Steel, structural plastic Weight 6.5 kg (14.5lb) Max. Working Pressure 75 psi (1
CCMY 6351N 6353N Tank Unit Threaded Version
Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin
CCMY 6353N Self-Seal Industrial Coupling Hose Unit
Meggitt self sealing couplings are designed for use wherever it is necessary to connect and disconnect hoses and pipelin
CCMY 8153, CCMY 8154 Stainless Steel Self-Sealing Couplings
The CCMY 8150-series stainless steel, self-sealing couplings are designed primarily for use in the petroleum, chemical a
CCMY 8155, CCMY 324, CCMY 4 Stainless Steel Self-Sealing Coupling
1 1/2 and 2-inch stainless steel self sealing coupling Material 316 stainless steel Weight 3.59 kg Max. wo
CCMY 8251, CCMY 8252 (2.5 Inch- 3 Inch) BSP Tank Unit Threaded Versions
2 1/2 and 3-inch stainless steel self sealing industrial couplings
CCMY 8600M2 4 Inch Inline Pressure Controller With Deadman
A sliding piston automatically adjusts the pressure drop through the valve by reducing or increasing flow area. The pist
CCMY8530 Intake Coupler Trolley
Operation: Lower the coupler from the vehicle stowage. Wheel the coupler into position over the pit valve. Turn the l
CCMY8500M2 4 Inch A.P.I. Coupler
The CCMY8500M2 Series 4-inch A.P.I. Coupler has been designed to comply with all the operational and test requirements o
CCMY8500M3 4 Inch A.P.I. Coupler
The CCMY8500M3 Series Four-inch A.P.I. Coupler has been designed to comply with all the operational and test requirement
F211 2.5 Inch Bayonet Flange Connection
The F211 2.5-inch coupler is a lightweight rugged version of the Meggitt underwing nozzle modified for use in connecting
F239 Pressure Control Coupler
The Meggitt air set pressure control coupler is designed to mate with EI standard hydrants or hydrants and adapters manu
F228 4 Inch Bottom Loading Coupler
The Meggitt 4-inch bottom loading coupler is designed in accordance with API RP1004. Features: Push-on, pull-off,
F214 3 Inch Bottom Loading Coupler
The Meggitt 3-inch bottom loading coupler is designed for the use in bulk plant system where the standard 4 inch API F22
Non pressure control coupler F250 - 4-inch API
The Meggitt F250 hydrant coupler is designed to connect to 4-inch hydrants and adaptors manufactured in accordance to AP
F351, F370, F376 Air Set inline Pressure Control Valves
The Meggitt family of line mounted control valves for aircraft refueller and hydrant service applications are available
F352, F353 Hydrant Shutoff Valve F352 AND F353
The Hydrant Shutoff Valve provides the means of controlling ON/OFF flow control in aircraft refueling operations. The va
F354, F355, F387, F390 Air set and spring set by-pass regulators
All 3 inch valves use the same body and piston design All 4 inch valves use the same body and piston design working
F368, F372, F360, F374, F380 Control Type Valves Deadman Only Valve
Meggitt hydrant valves are in use world-wide, refuelling aircraft of all descriptions. Hydrant valves for use as primary
F388, F389, F392 line mounted Deadman valves
These Meggitt valves can be used as shutoff valves in any fuel system. The application of either air or fuel pressure to
F412 F433 API Adaptors
F412 Two-way API adaptor The Meggitt F412 straight bottom loading two-way adaptor, made in accordance with the latest re
F414 F429 API Adaptors
The F414 adaptor is designed in accordance with API RP1004 to mate couplers F240, F250 and F228 if used for bottom
F417 F418 F419 F421 F426 F444 F445 Aviation Adaptors
Meggitt offers a wide variety of configurations and sizes of highly reliable bottom loading adapters. These units with p
F430345 Vacuum Breaker
The F509. The new design offers safety from accidental opening of the valve during fueling operations. During defueling
F430355 & F430375 Dry Break Quick Disconnect
The F430355 and F430375 Dry Break Quick Disconnects are designed for use with underwing aircraft fueling nozzles. This n
F505 F517 F527 F586 Venturis Aviation Equipment Aircraft Adaptors and Caps
Three-inch, four-inch, four-inch x three-inch and six-inch venturis Whittaker venturis are designed for use in fuelli
F540-1, F540-2, F559 Rate-Of-Flow limiter pilot Valve
Simple construction - no moving parts to wear out • Bayonet flange and locking lug for positive locking and sealing
F554, F571 Air/Fuel Sense Plug and Socket
Meggitt air/fuel sense quick couplings are designed to transmit both air and fuel pressure from a hydrant servicing vehi
F602 F610 F619 Float Pilot Valves
The Meggitt float pilot valve is designed to withstand the vibration and road shock inherent in tank truck systems avail
F613 Jet Level Sensor
Jet Level Sensor provides high level control for bottom loading systems without the use of moving parts. There are no pa
F614 F620 Internal Valves
The Meggitt bottom loading system designed for aircraft refuelers utilizes the unique jet level sensor in conjunction wi
F628 4 Inch Swivel
Meggit has a line of delivery hose swivels that provide excellent swiveling characteristics and yet utilize no ball bear
F635 4 Inch Internal Valve
Meggitt’s refueler/transport bottom loading system combines many features not previously available. This system ca
F646 Vent Valves
Meggitt F646 Series 5.25 inch vents are designed in accordance with DOT MC306 specifications and will mate with a standa
GBMY 5050M2 series Environmental Pit Box
Designed specifically to prevent any fuel spillage in the pit from escaping and contaminating the surrounding area, the
Hose End Control Valves F595
The Hose End Pressure Control Valve provides the means of controlling higher flow rates in aircraft refueling operations
HU3000 Series with Hk6 Surge Controller HU3000
• Choice of three different types of handle • Six slot engagement for easier coupling location overhead
Inline preset valves 2.5-Inch,3-Inch and 4-inch
OPERATION All valve types use a common body and are hydraulically controlled using line pressure to open or close the
1010 EN P ALUMINIUM e PTFE BALL FLOAT VENT VALVE WITH FLAME ARRESTER
BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor
1010 EN P PTFE 2 Inch
BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor r
F116 Pressure Fueling Nozzles
The F116 Nozzle is a medium weight Meggitt standard size nozzle designed for regular duty at commercial airports worldwi
1015 ALUMINIUM
BALL FLOAT VENT VALVES – VAPOR RECOVERY LINE STAGE II The RIDART BALL FLOAT VALVE is normally used in the vapor
Pressure Fueling Nozzle F145
The F145 single point nozzle is smaller and lighter in weight, yet maintains the strength, durability and robust design
PVMY 440-1 Pneumatically actuated pilot valve (With secondary lanyard enclosure)
The pneumatic valve is available as standard on new PVMY1000M3 and PVMY2010M3 pit valves or as a simple retrofit to exis
PVMY1000M3 Hydrant pit valves
• Compatible with all hydrant couplers conforming to EI and API recommendations • Meets all the requirement
PVMY2010M3 Hydrant pit valves
• Meets all requirements of the EI and API 3rd Edition recommendations • Lanyard, air operated or dual pivot v
Swivel Disconnect F582, F584, F596, F597
Meggitt nozzles, swivels and disconnects, are designed to provide an ability to custom build a nozzle system to meet a c
1370 BREAK AWAY VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
1510 ANTI-SIPHON VALVE ALUMINIUM
The anti-siphon valves is recommended for all aboveground storage applications to prevent fuel from exiting the storage
UVMY1000 Under Hydrant Shut-off Valve
The Meggitt Under Hydrant Valve is one of the most essential parts of a Hydrant System. Should the isolation feature in
1520 VAPOR RECOVERY 4" COUPLER CAMLOCK FEMALE ALUMINIUM
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1521 FEMALE API COUPLER FLANGED TTMA 4-inch
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1524 EN P 1534 EN P
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1524 ENP 3"FX4"M CAMLOCK VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1525 VR VAPOR RECOVERY ADAPTOR 2"-3"-4"F*4"M CAMLOCK
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1526 4 INCH 1527 R WITH LEVER API ADAPTER FEMALE
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1526 4-INCH 1527R FEMALE ADAPTER API RP 1400
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1527 4-inch 1527L ADAPTER API RP 1400
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1527 L WITH LEVER API ADAPTER MALE
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1528 ALUMINIUM DUST CAP AP
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1528 CL CAMLOCK CAP
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1528G RUBBER EPDM DUST CAP API
API ADAPTER FUEL TRANSFER VALVES The adapter API RP 1004 is used to prevent any possible leaking during the process of
1534 ENP 3"FX3"M CAMLOCK VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
1535 3"FX3"M CAMLOCK VAPOR RECOVERY ADAPTOR
VAPOR RECOVERY ADAPTER (CAMLOCK COUPLINGS) RIDART VAPOR RECOVERY ADAPTER are normally used in the vapour recovery line
180 EN P BRASS PTFE or SS
It’s a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 2014/34
198 ACTIVE COAL VENT
The ACTIVE COAL VENT RIDART VALVE is a required safety device near residential areas. Inside the valve there are active
20SS CHECK VALVE STAINLESS STEEL
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
23 / 26 SHUT-OFF VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
25 SHEAR VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
2510 BRASS SHEAR VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
27 / 28 SHUT-OFF VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
30 SHEAR CHECK VALVE
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
31 SS STAINLESS STEEL
EMERGENCY SHEAR VALVES The single and double poppet emergency SHUT-OFF VALVE is installed in the fuel delivery line and
60 B ANGLE CHECK VALVE
ABOVEGROUND STORAGE TANK The ANTI-SIPHON VALVE is designed to prevent siphoning of liquid from an aboveground tank to t
93 VAPOR STOP PTFE
ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening
ANTI-THEFT GRID
ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh
Mod. 10 DOUBLE POPPET FOOT VALVE
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 15-40 UNDER PUMP CHECK VALVE
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 1600, 1601, 1602 & 1610 QUICK DRY MALE COUPLING
QUICK DRY COUPLER FUEL TRANSFER VALVES The RIDART QUICK DRY is used to prevent any possible leaking during the process
Mod. 1605 QUICK DRY FEMALE COUPLING
It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is
Mod. 180 ENP P BRASS IN LINE FLAME ARRESTER
N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee
Mod. 181 ENP P BRASS IN LINE FLAME ARRESTER
Ridart 181 ENP a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directiv
Mod. 182 ENP P BRASS IN LINE FLAME ARRESTER
It’s a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 2014/34
Mod. 197 ENP PRESSURE VACUUM VENT Aluminium
PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec
Mod. 197 ENP PRESSURE VACUUM VENT WITH FLAME ARRESTERR No Spring
PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec
Mod. 197 ENP PRESSURE VACUUM VENT WITH FLAME ARRESTER STAINLESS STEEL
PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure Vacuum Valve with ribbon coil is a Protec
Mod. 197 VACUUM VENT VALVE PRESSURE/DEPRESSURE
PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure vacuum vent model 197 can be manufactured b
Mod. 21 Brass CHECK VALVE
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 330 ENP P ALUMINIUM IN LINE FLAME ARRESTER
N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee
Mod. 330 ENP P PTFE IN LINE FLAME ARRESTER
N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee
Mod. 330 ENP SS STANLESS STEEL IN LINE FLAME ARRESTER
N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee
Mod. 425 ENP P ALUMINIUM IN LINE FLAME ARRESTER
N LINE DEFLAGRATION FLAME ARRESTER VALVES The In Line Flame Arrester Rid art is a Protection System with stainless Stee
Mod. 442 3-inch ALUMINIUM OVERFILL PREVENTION VALVE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 442 3-inch STANLESS STEEL OVERFILL PREVENTION VALVE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 442 B -80 3 inch - 4inch ALUMINIUM OVERFILL PREVENTION VALVE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 442 OR HORIZONTAL OVERFILL PREVENTION VALVE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 442 OVERFILL PREVENTION VALVE PTFE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 442 SHORT- OVERFILL PREVENTION VALVE
It’s a Safety Device in according with Directives ATEX 2014/34/EU, EN ISO 13616-1:2016, EN ISO 80079-36:2016, Tech
Mod. 446 2inch-3inch ALUMINIUM OVERFILL PREVENTION VALVE
It’s a Safety Accessories in according with Directive 2014/34/EU and harmonized standard EN ISO 13616. The valve i
Mod. 50 FEMALE FILTER
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 55 Adjustable by-pass valve for submersible pump
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 60 GH ANGLE CHECK
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 60 SS STAINLESS STEEL
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 60R SHUT-OFF ANGLE CHECK VALVE
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 62 ANGLE CHECK VALVE
ACCESSORIES FOR SUCTION LINE The ANGLE CHECK VALVE is a device in according with Directive 2014/34/EU and harmonized
Mod. 93 and 93CL VAPOR STOP
ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening wh
SS or PTFE CAPS 3″ – 4″
ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening
SS or PTFE COUPLINGS 3″ – 4″
ACCESSORIES FOR LOADING LINE VAPOR STOP RIDART is used to prevent any possible vapors exposure after the cap opening
Floating Suction Arms
Aluminium floating suction system 4" complete with swivels and floats engineered to the customer-specific tank deta
F375, F377, F378 Spring set demand control valve
These demand regulators are basically the same units as the Meggitt air set valves except they utilize an adjustable spr
F383, F384, F386, F393 line mounted shut off valve
3-inch and 4-inch bottom loading shutoff valves for use with either the jet level sensor or float pilot valves. Refer to
GBMY 3806M2 1.5-inch Sampling Vent or Drain Unit
Fits into standard 18-inch pit externals with 6-inch ANSI class 300 flange • Incorporates two 1.5-inch fire safe ba
Pressure Fueling Nozzle F117
The F117 nozzle is designed to be used where heavy duty use is expected. The F117 provides a positive leak tight connect
Mod. 197 ENP PRESSURE VACUUM VENT WITH FLAME ARRESTER BLACK PTFE
PRESSURE VACUUM VENT WITH END OF LINE DEFLAGRATION FLAME ARRESTER Pressure vacuum vent model 197 can be manufactured b
ATF TRANMISSION FLUID (DEXTRON II) 4LTR
ATF TRANMISSION FLUID (DEXTRON II) 4LTR, BOX OF 6PCS
ATF TRANMISSION FLUID (DEXTRON II) 1LTR
ATF TRANMISSION FLUID (DEXTRON II) 1LTR, BOX OF 12PCS
Cast Iron Hand Rotary Pump-JS-32
Suction distance:1.5m Lift distance:5m Flow rate:22L/min+ , 108*17*17 5PCS/CTN - (23.5/24.5 KG)
Hand Pump-Oriental-C
Suction distance:1.5m Lift distance:5m Flow rate:30L/min Aluminum material , 76*39*32 10PCS/CTN - (23/24 kg)
Lever Action Hand Pump-TP490
Suction distance:1.5m Lift distance:5m Flow rate:30L/min , 48*29*33 10PCS/CTN - (20/22 KG)
Syphon Pump-TP812
Suction distance:1.5m Lift distance:5m Flow rate:22L/min , 122*36*40 30PCS/CTN - (8.6/12 KG)
Plastic Rotary Pump-TP90R
Suction distance:1.5m Lift distance:5m Flow rate:30L/min , 62*50*39 10PCS/CTN - (19/20 KG)
Hand Pump - TP610S
Suction distance:1.5m Lift distance:5m Flow rate:32L/min , 84*28*21 10PCS/CTN - (20/22 kg)
Rotary Hand Pump-TP90S
Suction distance:1.5m Lift distance:5m Flow rate:30L/min 304SS material , 78*38*28 10PCS/CTN (35/36 KG)
Electric Gear Oil Pump-DYB15
Suction distance:4m Lift distance:20m Flow rate:40L/min Size:1” , 44*31*21 2PCS/CTN (17.2/18.2 KG))
Pneumatic Oil Pump-TP1001
Ratio:1:1 Flow Rate:23L/min Suction tube length:270mm , 62*18*22 4PCS/CTN (20/21 KG)
Pneumatic Oil Pump-TP1002
Ratio:1:1 Flow Rate:23L/min Suction tube length:940mm , 133*18*22 4PCS/CTN (32/33 KG)
Pneumatic Oil Pump-TP1004
Ratio:3:1 Flow Rate:14L/min Suction tube length:730mm , 94*18*22 4PCS/CTN - (24/25 KG)
Pneuamatic Oil Pump-TP1005
Ratio:3:1 Flow Rate:14L/min Suction tube length:940mm , 122*18*22 4PCS/CTN - (24/25 KG)
Pneumatic Oil Pump-TP1006
Ratio:5:1 Flow Rate:18L/min Suction tube length:730mm , 42*35*34 1PC/CTN - (16/17 KG)
Pneumatic Oil Pump-TP1007
Ratio:5:1 Flow Rate:18L/min Suction tube length:730mm , 42*35*34 1PC/CTN - (16/17 KG)
Pneumatic Oil Pump-TP1008
Ratio:5:1 Flow Rate:18L/min Suction tube length:940mm , 50*40*44 10PCS/CTN - (11/12 KG)
Digital Over Gear Meter-FM-17
Size:1/2” Flow rate:0-40L/min , 57*40*28 40PCS/CTN - (17/18 KG)
Oil Drum Trolley-TPOT-01
Oil Drum Trolley Suitable for 20-60L drum , 46*46*10 1PC/CTN - (14/15 KG)
Oil Drum Trolley-TPOT-02
Oil Drum Trolley Suitable for 20-60L drum , 46*46*10 1PC/CTN - (14/15 KG)
Digital Meter Gun Trolley-TP1317A
3:1 ratio pump Digital meter gun Drum Trolley TPOT-02 4m discharge hose , / 33/34KG
Digital Meter Gun Trolley-TP1317B
5:1 ratio pump Digital meter gun Drum Trolley TPOT-02 4m discharge hose , / 34/35KG
Mobile oil dispensing kit -Digital Meter Gun Trolley-TP1318A
The mobile oil dispensing kit includes a hose reel with a digital pre-set meter gun to dispense pre-set oil volumes &
Mobile oil dispensing kit -Digital Meter Gun Trolley-TP1318B
The mobile oil dispensing kit includes a hose reel with a digital pre-set meter gun to dispense pre-set oil volumes 5
Electric Grease Gun-TP1190
Electric grease gun Capacity:450g , 54*53*44 5PCS/CTN 34.5/36KG
Pneumatic Grease Pump-TP1012
Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:480mm Suitable for 20kg drum , 78*18*22 4PCS/CTN 20/21KG
Pneumatic Grease Pump-TP1013
Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:740mm Suitable for 60kg drum , 104*18*22 4PCS/CTN 22/23KG
Pneumatic Grease Pump-TP1014
Ratio:50:1 Flow Rate:1.5kg/min Suction tube length:940mm Suitable for 180kg drum , 122*18*22 4PCS/CTN 24/25KG
Manual Grease Pump-TP499
Manual grease pump Suitable for 16-30kg drum , 57*57*39 8PCS/CTN 22/26KG
Grease Control Gun-TP1600B
Grease control valve Inlet size:1/4” , 55*23.5*21 20PCS/CTN 17/18KG
Release Coupler-TPGC-001
Quick release coupler Inlet size:1/8” , 56*42*39 50PCS/CTN 20/21KG
Adblue Meter-K24
Flow rate:7-120L/min Suitable for adblue Size:1” , 46*32*26 20PCS/CTN 9/10KG
DC Pump-TPAD-40D
Adblue pump Size:1” Flow rate:35L/min Voltage:12V or 24V , 39*39*41 4PCS/CTN 20/22 KG
DC Pump-TPAD-401
Adblue pump Size:1” Flow rate:35L/min Voltage:240V , 39*39*41 4PCS/CTN 24/26 KG
IBC Adblue Pump-TPAD-40K
Adblue IBC kit Size:1” Flow rate:35L/min Voltage:240V , 42*34*40 1PC/CTN 18/20 KG
Electric Transfer Pump-DYB40
Diesel pump Size:3/4” Flow rate:40L/min Voltage:12V or 24V , 60*23*60 6PCS/CTN 24/26 KG
Electric Transfer Pump-DYB60
Diesel pump Size:1” Flow rate:60L/min Voltage:240V , 49*30*22 2PCS/CTN 15/17 KG
Electric Transfer Pump-DYB80
Diesel pump Size:1” Flow rate:80L/min Voltage:240V , 29*22*25 1PC/CTN 12/13 KG
Electric Transfer Pump-ETP-40
Diesel pump kit Flow rate:40L/min Voltage:12V , 42*35*34 1PC/CTN 10/11 KG
Ex-proof Fuel Transfer Pump-DYB50
12V drum pump kit Flow rate:57L/min Voltage:12V , 42*34*40 1PC/CTN 14/15 KG
Portable Fuel Dispenser-JYJ-60
Diesel refueling Kit Flow rate:70L/min , 36*32*24 16PCS/CTN 17/18 KG
PP Diaphragm Pump(60L/M)-QBYPP-15
Size:1/2” Flow rate:60L/min PP material , 39*32*41 1PC/CTN 5/6 KG
PP Diaphragm Pump(170L/M)-QBYPP-25
Size:1” Flow rate:170L/min PP material , 45*36*49 1PC/CTN 8/9 KG
Aluminium Diaphragm Pump(60L/M)-QBY-15
Size:1/2” Flow rate:60L/min Aluminum material , 39*32*41 1PC/CTN 8/9 KG
Aluminium Diaphragm Pump(170L/M)-QBY-25
Size:1” Flow rate:170L/min Aluminum material , 45*36*49 1PC/CTN 10/11 KG
Aluminium Diaphragm Pump(480L/M)-QBY-50
Size:1 1/2” Flow rate:480L/min Aluminum material , 52*45*56 1PCS/CTN 17/18 KG
23/26 1" 1/2 BSPP Shutt-off Valve
Shutt-off Valve Threaded Connection:1" 1/2 BSPP Material:Cast Iron / PTFE Coated
197 AT BSPP 1"-2" Vacuum Vent
Pressure Vaccum Vent with Roll-Over Protection Threaded Connection:BSPP 1"-2" Material:Aluminium
558 3"BSPP
Adjustable Angle Check Valve Threaded Connection:3"BSPP Material:PTFE Coated / Brass and Anodized Alu
1450 A CamLock BSP 1" to 4"
Male CamLock Coupler Threaded Connection:CamLock BSP 1" to 4" Material:Aluminium/ Stainless Stee
Safety valve 197B1
Inlet poppet closes automatically in case of tank overturning Body: brass Sealing material: Metal Thread: BSP ISO
Break Away Valve Axial Sharing-1370
Body: aluminium, stainless steel Poppet material: brass Gasket: O-ring Viton® Thread: BSP ISO 228-1 Separation
In-line Sight Glass-600
Body: aluminium *nickel-plated brass Gasket: NBR Thread: BSP ISO 228-1 Art.No. Size 093440 3/4”M x 3/4&rdqu
90° Swivel 229
Body: aluminium Connection material: nickel-plated brass Gasket: O-ring Viton® Thread: BSP ISO 228-1
Hose mast for fuel dispenser Bottom connection-1390
Body: painted aluminium Spring material: stainless steel Suitable for hoses Ø 25, 30, 32 Art.No. Length 090
Hose mast for fuel dispenser lateral connection-1380
Body: painted aluminium Spring material: stainless steel Suitable for hoses Ø 25, 30, 32 Art.No. Length 090
Cap for filter support-231T
Body: aluminium Gasket: Viton®, NBR Thread: BSP ISO 228-1 *gasket for 000940, 000941 ** gasket for 000945 Art
In-line filter support-231
Body: aluminium Thread: BSP ISO 228-1 Art.No. Size 000830 3/4” F x 3/4”F x 12 UNF 000831 3/4” F
Braided flexible hose -832 MM
Body: stainless steel Pressure: up to 35 bar Couplings material: steel Thread: BSP ISO 228-1 high pressure
Flexible hose-830/7
Body: stainless steel Flanges material: brass Maximum pressure: 1,5 bar
Flexible hose-830/5
Body: stainless steel Couplings material: brass Maximum pressure: 1,5 bar Thread: BSP ISO 228-1 Completed with female co
Flexible hose-830/4
Body: stainless steel Coupling and flanges material: brass Maximum pressure:1,5 bar Thread: BSP ISO 228-1 *turning femal
Flexible hose-830/3
Body: stainless steel Coupling and flanges material: brass Maximum pressure :1,5 bar Thread: BSP ISO 228-1
Flexible hose-830/2
Body: stainless steel Couplings material: steel Maximum pressure:1,5 bar Thread: BSP ISO 228-1
Flexible hose-830/1
Body: stainless steel Couplings material: brass Maximum pressure 1,5 bar Thread: BSP ISO 228-1
Flexible hose-830
Body: stainless steel Couplings material: brass Maximum pressure: 1,5 bar Thread: BSP ISO 228-1 Turning female coupling
Ball valve heavy type-401
Body: chrome plated brass Lever material: aluminium Thread: BSP ISO 228-1 Gasket: NBR
Ball valve heavy type-395
Body: brass Lever material: steel Thread: BSP ISO 228-1 Gasket: O-ring Viton®
Ball valve -400
Body: chrome plated brass Lever material: aluminium Thread: BSP ISO 228-1 Gasket: O-ring Viton® ff
Ball valve heavy type-391
Body: chrome plated brass Lever material: aluminium Thread: BSP ISO 228-1 Gasket: NBR MF
Ball valve heavy type-390
Body: chrome plated brass Lever material: aluminium Thread: BSP ISO 228-1 Gasket: O-ring Viton® MF
CamLock Female cap-1480L
Body: aluminium Gasket: NBR Art.No. Size 1480L DN25 1” 1480L DN32 1”1/4 1480L DN40 1&rdqu
Flanges Female square flange-1187OT
Body: brass Thread: BSP ISO 228-1 Art.No. Size 090760-1 OT 1”1/2 090790-1 OT 2” 090850-1 OT
Flanges Male square flange-1189OT
Body: brass Thread: BSP ISO 228-1 Art.No. Size 090750-1 OT 1”1/2 090780-1 OT 2” 090840-1 OT 3”
Flanges Gasket for brass flange-1183 OT
Omnia Blu Asbestos free Art.No. Size 090751 1”1/2 090781 2” 090841 3”
Flanges Triangle flange-
Art.No. Size 010980 1”1/2 010980 FKM Viton gasket 010980 NBR NBR gasket
Flanges Flange-831
Body: brass (OT), aluminium (AL) Art.No. Size 831-01 OT 1”1/2 831-01 AL 1”1/2 831-05 NBR gas
Flanges Flange-830/8
Art.No. Size 081220 DN 1”1/2 x A98 x B28 081221 DN 2” x A98 x B28 081260 cork gasket (A98) 081
Flow separator-1165
Body: steel *Stainless steel Art.No. Size 090757 1”1/2 090787 2” 090847 3” 090787-1* 2”
Guillemen Symmetrical coupling Female threaded-1550
Body: aluminium (AL), brass (OT) Thread: BSP ISO 228-1 3"F
Guillemen Symmetrical coupling Male threaded-1555
Body: aluminium (AL), brass (OT) Thread: BSP ISO 228-1 Art.No. Size 1555DN80 AL 3” M 1555DN80 OT 3” M
Guillemen Symmetrical coupling -1570
Body: aluminium (AL), brass (OT), bronze (BR) Art.No. Size 1570DN80 AL 3” R x 80 1570DN80 OT 3” R
Guillemen Symmetrical coupling Male threaded-1575
Body: aluminium (AL), brass (OT) Thread: BSP ISO 228-1 Art.No. Size 1575 80-80 AL 3” R x 3”M
Guillemen Symmetrical coupling Female threaded-1580
Body: aluminium (AL), brass (OT) Thread: BSP ISO 228-1 Art.No. Size 1580 80-80 AL 3” R x 3”F
Symmetrical plug-1565
Body: aluminium (AL), brass (OT) Art.No. Size 1565DN80 AL 3”R 1565DN80&n
TW COUPLINGS Quick adapter EN 14420-6-2000VK
Body: brass Gasket: elastopal Thread: BSP ISO 228-1 Art.No. Size VK50-1 OT 2”F x 2” R VK80-
Female Cap EN 14420-6-2015 MB
Body: brass (OT), aluminium (AL) Gasket: NBR Chain included Art.No. Size MB50 AL 2” R MB80 AL 3&r
Female quick coupler female threaded EN 14420-6-2005 MK
Body: brass Thread: BSP ISO 228-1 Gasket: NBR Art.No. Size MK50-1 OT 2”F BSP x 2” RF MK80-1 OT 3&rdqu
Spannloc clamps-2035
Body: aluminium Art.No. Size 2035DN38 Ø38 2035DN50 Ø50 2035DN65 Ø65 2035DN75 Ø75 203
High pressure clamps-805
Art.No. Size 093610 Ø52 x Ø55 093620 Ø56 x Ø59 093630 Ø60 x Ø66 093670 &Os
Drain valve
Body: aluminium Ball material: chrome-plated brass Draining capacity: 1000 l/min Thread: BSP ISO 228-1, 3” Male
Drain valve with sight glass
Body: aluminium Ball material: chrome-plated brass Draining capacity: 1000 l/min Thread: BSP ISO 228-1, 3” Male
Quick-dry male coupling 105mm dia
Maximum pressure: 8 bar Gasket: Viton® Thread: BSP ISO 228-1
Quick-dry male coupling 119mm dia
Maximum pressure: 8 bar Gasket: Viton® Thread: BSP ISO 228-1
Master Flow Meter
The master meter is a high-quality product that will last longer Max flow rate for Jet Fuel: 2600 LPM complete with M
HEPCV Test Rig
Mobile Aviation fuel Test Rig for testing the pressure control system for an aircraft Fueling system such as an aviation
55 B -Adjustable Angle Check Valve
Ridart model 55B is a Safety Device in according with Directive 2014/34/EU and harmonized standard EN ISO 13617-2. The v
Self Priming Centrifugal Pump
Heavy duty, reliable Self-Priming Centrifugal pump. PG-8, 35728, 2” MP PUMP U.S.A SELF PRIMING CENTRIFUG
Mod 440B GRAVITY OVERFILL VALVE 3"-4"
Overfill valves are designed to avoid overflow of liquid during filling operations of underground (UST) or abo veground
Mod. 440 GRAVITY OVERFILL VALVE 2"-3"-4"
Overfill valves are designed to avoid overflow of liquid during filling operations of underground (UST) or abo veground
Mod 445s Overfill prevention device
The Overfill prevention valve 445S model is a safety device designed to prevent overfill of liquid from an aboveground a
Above Ground Fuel Storage Tank - Captain(CT) series
The Fuel Storage Tank SJE Captain Series is a self bunded tank suitable for safely storing a range of fuels and lu
Aviation Fuel Storage Tanks
The SJE-CTA range of containerized fuel storage tanks have been developed for the safe storage and handling of Aviation
Aviation Fuel Storage Blocks
Smart Jet engineering double walled steel aviation fuel blocks are build to UL 142, AS1692 and AS1940 Standards Featu
Above Ground Fuel Station
Smart Jet Engineering Modular Fuel Stations can be used to store diesel and gasoline. UL142 approved or UL2085 f
We want to give you 10% discount for your first order,
Use discount code at checkout
